Runtime's RAID Reconstructor will help you recover data from
broken

* RAID Level 5 Array consisting of 3 to 14 drives
* RAID Level 0 Array (Striping) consisting of 2 to 14 drives

Even if you do not know the RAID parameters, such as drive
order, block size and direction of rotation, RAID
Reconstructor will analyze your drives and determine the
correct values. You will then be able to create a copy of the
reconstructed RAID in a virtual image (.vim), an image file
(.img) or on a physical drive.

Once you created an image you can either mount it with
Captain Nemo or use it for further data recovery processing
with Runtime's GetDataBack. If you create the image on
another physical drive, you can process it with Captain Nemo
or GetDataBack too or you might even be able to directly boot
from it.

Watch these screenshots on how you recover your files using
RAID Reconstructor together with Captain Nemo.
RAID Reconstructor is read-only

It will not try to "fix" your RAID. It will merely create a
copy of your RAID at another location. It will collect sector
by sector from each single drive involved and write these
sectors in the correct order to the designated destination.
This process is also called "de-striping".

Because one drive is redundant in RAID 5, it is sufficient to
have one less than the original number of drives (N) in the
array. RAID Reconstructor can recalculate the original data
from the N-1 drives. For a RAID-0 (striped) array you will
need all drives.

The RAID Reconstructor will recover both, hardware and
software RAIDs. It will recover from broken Windows Dynamic
Disk sets.

http://www.runtime.org/

Download File Size:3.01 MB

---