2016
Udemy
Azy Geek
1:00
English
An open-source computer hardware and software company that designs and manufactures micro-controller-based kits for building digital devices and interactive objects that can sense and control objects in the physical world.
For programming the micro-controllers, the Arduino project provides an integrated development environment (IDE) based on the Processing project, which includes support for the C and C++ programming languages.
This course is for anyone who loves to work with arduino.
Section 1: Introduction
Lecture 1
Introduction
00:55
Section 2: Components
Lecture 2
Project components list
The text
Lecture 3
Making Car Body
04:11
In this lecture we will setup the car body by using the car chassis.
Lecture 4
Motor and motor driver
03:47
In this lecture we will learn about the working of direct current motors and how dc motors can be controlled by arduino.
Lecture 5
Motor Driver Demonstration
04:00
In this lecture we will see the practical demonstration of controlling dc motors using the motor controller bridge.
Lecture 6
MotorController L298N Sketch
The text
Lecture 7
BreadBoard
03:55
In this lecture you will learn about the working of bread. How it is used for building circuits.
Lecture 8
Sensor
04:01
In this lecture you will learn about using the HC SR04 distance sensor, how you can use it for detecting obstacles.
Lecture 9
Sensor HC-SR04 Sketch
The text
Lecture 10
Distance Sensor Demonstration
03:32
In this lecture we will see the practical demonstration of detecting obstacles using the distance sensor HC SR04.
Lecture 11
Microcontroller
01:38
In this lecture i will give an overview of the arduino microcontroller board.
Lecture 12
bluetooth
05:59
In this lecture you will learn about the HC-05 Bluetooth module is used for communication with other devices.
Lecture 13
Bluetooth HC-05 Sketch
The text
Lecture 14
Android Application
02:46
In this lecture i will tell about the android application used for serial communication over Bluetooth in order to communicate with the arduino.
Section 3: Final Assembly
Lecture 15
Wiring Of Motors
05:20
In this lecture you will learn how to wire up the DC motors and connect them to the motor controller.
Lecture 16
Wiring Arduino
05:28
In this lecture we will add an arduino microcontroller board to the car body.
Lecture 17
Adding Distance Sensor
01:46
In this lecture you will learn how to add distance sensor to the arduino.
Lecture 18
Adding Bluetooth
01:21
In this lecture you will learn how to connect the bluetooth module to the arduino.
Lecture 19
Final RC Car Sketch
The text
Lecture 20
Understand the Code
03:32
In this lecture i will try to make you understand the final code that we are going to upload to the arduino.
Lecture 21
Uploading Code and testing
02:48
In this lecture we will upload the code and test our car.
Lecture 22
Attaching Batteries
03:20
In this lecture you will learn how to connect the external batteries as power source.
Section 4: Lets Drive
Lecture 23
Drive your car
00:39
udemy.com/android-arduino
Download File Size:730.55 MB