× Siemens Simcenter Flotherm XT 2020.2 Close
Siemens Simcenter Flotherm XT 2020.2 | 8.2 Gb
The Mentor, a Siemens business, is pleased to announce the availability of Simcenter Flotherm XT 2020.2 - CAD Centric electronics cooling software and sister product to Simcenter Flotherm. This release added new functionalities that continue to support the creation of a thermal digital twin of an electronics product during development and also enhance productivity and workflow.
Simcenter Flotherm XT 2020.2 Release Highlights - Date: January 2021
New Features The following new features are available in this release.
Simcenter Flotherm XT
Enhancements to enable different material to be used in Material Map option in PCB SmartPart (transferred from EDA Bridge):
- User is able to set material for:
. Conductor layers
. Dielectric layers.
. Via fill material
- User picks material from project list, library or creates new
- Use “Void” to represent drilled via.
× Siemens Simcenter Flotherm XT 2020.2 Close
Import Power Map from DC Drop calculation in Hyperlynx PI (V8.2.1 and newer):
- Obtain File from Hyperlynx PI DC Drop calculation using “Write power-map files for Flotherm” tick box.
× Siemens Simcenter Flotherm XT 2020.2 Close
- Import files into PCB SmartPart with material map transferred from EDA Bridge
. Repeat for each net required
. Power for each net and total power displayed
× Siemens Simcenter Flotherm XT 2020.2 Close
- View layer with Volume Source [dimensionless] active to check position of power.
. Red illustrates powered area.
× Siemens Simcenter Flotherm XT 2020.2 Close
- After solution temperature can be displayed.
× Siemens Simcenter Flotherm XT 2020.2 Close
Co-simulation to account for temperature in DC Drop Calculation in Hyperlynx PI and return updated power values (Hyperlynx PI Vx2.8 required):
- User connects to Hyperlynx project.
- User selects nets of interest (DC Drop simulation settings required to be set in Hyperlynx for each of these nets)
× Siemens Simcenter Flotherm XT 2020.2 Close
- At each iteration until convergence:
. Temperature passed from Flotherm XT to DC Drop calculation to ensure correct value for electrical resistivity.
. DC Drop simulation performed by Hyperlynx PI
. Power passed back to Flotherm XT
- Note that Hyperlynx PI must be installed on the same computer that is being used to run Simcenter Flotherm XT.
× Siemens Simcenter Flotherm XT 2020.2 Close
FloTHERM XT is a unique, award-winning thermal simulation solution that can be used during all stages of the electronics design process - from conceptual design to manufacturing - improving product quality, reliability and time-to-market.
Based on the electronics cooling DNA of the Mentor market-leading FloTHERM technology and the FloEFD CAD-centric philosophy, the award-winning FloTHERM XT product is the industry’s first integrated mechanical design automation (MDA) and electronic design automation (EDA) electronics cooling solution.
The FloTHERM XT product can be used at all stages of the electronic design process, from design concept through manufacturing. Its CAD-centric technology and robust mesher simulates complex geometries with ease, speed, and accuracy for improved product quality and reliability.
Simcenter Flotherm XT
Mentor Graphics, a Siemens Business, is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronic, semiconductor and systems companies. We enable companies to develop better electronic products faster and more cost-effectively. Our innovative products help conquer complex design challenges. Mentor is technology leader in full chip emulation, Functional Verification, Design-for-Test and physical verification with its Veloce, Questa, Tessent and Calibre platforms.
Product: Siemens Simcenter FloTHERM XT
Version: 2020.2 build 21.05.1 with Simcenter3D 2020.2 Documentation*
Supported Architectures: x64
Website Home Page : www.mentor.com
Language: english
System Requirements: PC **
Size: 8.2 Gb
* release info: Siemens.Simcenter.Flotherm.XT.2020.2.Win64-SSQ
Siemens.Simcenter.3D.2020.2.Series.Docs.English.Win64-SSQ
** System Requirements: Supported Operating Systems
- Microsoft Windows 7 Professional, Ultimate or Enterprise 64-bit edition latest SP
- Microsoft Windows 10 Versions 1903 and 1909 (Pro or Enterprise 64-bit edition).
- Microsoft Windows Server 2012R2 64-bit edition (*) .
- Microsoft Windows Server 2016 64-bit edition.
(*) Please note that this will be the last version to support Windows Server 2012 R2.
Hardware Requirements
- x64 compatible PC.
- Ethernet network adapter.
- Mouse or other pointing device.
- DVD-ROM drive.
- 8 GB RAM minimum.
- Graphics card with OpenGL support minimum 64 MB memory and minimum XGA screen resolution (1024 x 768).
- Minimum disk space requirements: 9 GB, which includes space necessary during installation and when modifying an existing installation. 4 GB is always required on the default drive (C:\ or equivalent) whether installing to the default drive or a non default drive.
For a “FlexNet Only” 32-bit installation, 100 MB, which includes space necessary during installation and when modifying an existing installation.
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
× Siemens Simcenter Flotherm XT 2020.2 Close
Download File Size:8.03 GB
|
