Buy and Download - Groove3 iZotope RX 4 Explained

2014
Groove3
Mike Thornton
05:19:00
English

iZotope RX 4 is here and iZotope guru Mike Thornton (Mr RX It) delivers everything you need to know to jump into RX 4 and harness its full potential! Get detailed information using real-world examples and clean up your recordings making them sound better than ever. No matter what DAW you use, iZotope RX 4 Explained provides expert knowledge that allows you to reduce unwanted noise and eliminate damage to your precious audio.
Mike starts with a detailed Introduction that covers everything from the User Interface to the various Settings available in iZotope RX 4. You’ll also learn all about the Waveform & Spectrogram Displays, Recording Into RX 4, and Saving Files. Mike then demonstrates the power of Markers & Regions, as well as the RX Monitor & RX Connect Plug-Ins.
Next, you’ll see and hear real-world Examples of Treating Noisy Audio with the Denoise & Distortion Modules. Using Overloaded Samples, Mike demonstrates how easy it is to Reduce Noise and Distortion using RX 4 in Pro Tools, as well as within the plug-in itself. You’ll also learn Hum & Buzz Removal techniques as Mike walks you through using the Remove Hum Module.
When it comes to Spectral Repair, you’ll want to check out Mike’s tips for Removing Unwanted Noise, including Camera Shutter Clicks, Mic Pops, Whistles at a Concert, and more. Classic Recordings and Vinyl enthusiasts will also love this series as it covers Restoring Vinyl Records & Magnetic Tape Recordings, using RX 4 to clean up Scratched Records and Noisy Tape Recordings.
Moving on, Mike covers the Declick Module & Deverb Module, where you’ll learn how to easily Get Rid of Unwanted Reverb, Mouth Clicks, and Excessive Use of Plectrum on Bass and Acoustic Guitars. If you need to get a better handle on Levels and Loudness, Mike walks you through the Clip Gain feature of iZotope RX 4, and you’ll also see How to Make Your Recordings Compliant with Accepted Loudness Specifications using the Loudness Module.
Matching EQ and Ambience is important, especially when it comes to dialogue recordings, so Mike also covers the EQ Match & Ambience Match features of iZotope RX 4. If you need to Separate Sounds from Tones on a Recording, you’ll love the explanation and demonstration of the Deconstruct Module as Mike shows you How to Break Down Breath Sounds in a Flute Recording and How to Take Apart the Components of a Clock Chiming.
Finally, Mike walks you through all of the Signal Processing Modules in iZotope RX 4, including Gain, EQ, Channel Operations, Spectrum Analyzer, Plug-In Hosting, Time & Pitch, Resample, and Dither with examples for each.
You don’t have to put up with unwanted noise or poor audio quality any longer, so clean up your act! Let Mike Thornton (Mr RX It) show you how using iZotope’s amazing RX4 Audio Repair and Restoration Technology… “Watch iZotope RX 4 Explained” today!

Introduction (04m:49s)
In this video Mike outlines why applications like iZotope RX 4 are needed in an increasing noisy world with examples of the kinds of problems iZotope RX can be used for. He also covers the different formats RX 4 comes in, RX 4 or RX 4 Advanced; plug-in or Stand Alone.
User Interface (10m:53s)
In this video Mike goes through the key parts of the graphical user interface and tool in iZotope RX 4.
Waveform and Spectrogram Display (13m:08s)
In this video Mike explains how to understand and interpret the waveform and spectrogram display in iZotope RX 4.
Settings (12m:36s)
In this video Mike shows how to configure RX 4 with your interface and how to use and reconfigure keyboard shortcuts in iZotope RX 4.
Recording into RX 4 (03m:55s)
In this video Mike takes you through a new feature in RX 4 where you can ingest audio direct into RX 4.
Saving Files (07m:35s)
Mike demonstrates using the new RX 4 document format, the new Export menu added in RX 4 and the RX 4 Advanced feature to export history as an XML file.
Creating and Using Markers and Regions (05m:24s)
In this video Mike shows how to use markers and regions in RX 4 to help navigate around projects.
RX Monitor and Connect Plug-Ins (05m:14s)
In this video Mike shows how you can use the new RX 4 plug-in to monitor the standalone RX from within your DAW and you can get the best of both worlds with the new RX 4 Connect plug-in to export audio from your DAW out to RX 4, work on it in the standalone app and then bring it back into your DAW.
Denoise Pt. 1 (15m:10s)
In this video Mike explains and demonstrates the Denoise module in action by cleaning up a hissy recording.
Denoise Pt. 2 (10m:58s)
In this video Mike explains and demonstrates the features of the Denoise module that are only available in RX 4 Advanced including the Adaptive mode and the Advanced Settings.
Denoise Pt. 3 (06m:35s)
Mike shows how to use the Denoiser as a plug-in in Pro Tools.
Dialogue Denoiser (05m:49s)
Mike shows how to use the new Dialogue Denoiser which is now included in RX 4 to treat audio in real time with no latency as a plug-in in Pro Tools.
Distortion Pt. 1 (06m:56s)
In this video Mike explains and demonstrates the Declip module in action with an overloaded recording on a speedboat.
Distortion Pt. 2 (07m:33s)
Mike shows how to use the Declick and Deconstruct modules to reduce other kinds of distortion.
Remove Hum Pt. 1 (11m:50s)
In this video Mike explains and demonstrates the Remove Hum module in action with a file that has nearly as much hum as wanted signal including the adaptive hum feature.
Remove Hum Pt. 2 (05m:36s)
In this video Mike explains and demonstrates using the Denoise module to clean up the same recording he used with the Remove Hum module.
Spectral Repair Pt. 1 (12m:51s)
In this video Mike gives an overview of how to use the Spectral Repair module.
Spectral Repair Pt. 2 (13m:54s)
In this video Mike demonstrates the Spectral Repair module in action treating sudden sounds like whistles in a concert, bike bells, camera shutter sounds and mic pops.
Spectral Repair Pt. 3 (05m:50s)
Mike shows how to use Spectral Repair in Pro Tools using RX 4 Connect.
Vinyl (09m:29s)
In this video Mike explains and demonstrates the Declick and Decrackle module in action with a very scratched vinyl record.
Tape (14m:11s)
Mike shows how to use the Channel Operations module and the Denoise module to fix a poor quality recording with azimuth and noise problems.
Other uses for the Declick Module (05m:20s)
Mike shows other uses for the Declick module removing mouth clicks, and clicks from excessive use of a plectrum on Bass and acoustic guitar.
The Dereverb Module (11m:15s)
Mike shows how to use the new RX 4 Advanced Deverb module to treat recordings made in different reverberant spaces.
Leveler (11m:29s)
Mike shows how to use the new Clip Gain feature to help manage levels within a file right inside RX 4 and how to use the new Leveler module in RX 4.
Loudness (12m:01s)
Loudness normalization is being adopted across the world and in this video Mike will show how to use the new loudness module in RX 4 Advanced to keep get you content to comply with the new loudness standard. See how the Batch Processor in RX 4 can help you make all your files loudness compliant.
EQ Match (03m:01s)
We often need to match the EQ of two clips with the same voice. Mike shows how to use the new EQ Match module in RX 4 Advanced.
Ambience Match (05m:04s)
How many times have you needed some ambiance ‘fill’ to cover some gaps in you dialog tracks? In this video Mike shows how to us the new Ambience Match module in RX 4 Advanced to extract the ambience from one track and add it to another, or create a clean matching fill track.
Deconstruct (05m:35s)
In this video Mike explains and demonstrates that the RX 4 Advanced Deconstruct module is great for sound design as well as restoration by separating the breath and wind sounds from the tonal sounds in a flute recording and then separating the different components in a clock chiming.
Gain (03m:32s)
In this video Mike explains and demonstrates the Gain module in action adjusting the gain of a clip and adding a fade in and fade out too.
EQ (09m:19s)
In this video Mike explains and demonstrates the EQ module in action showing the different types of EQ and how they affect the sound.
Channel Operations Pt. 1 (09m:39s)
In this video Mike explains and demonstrates the Mixing and Phase tabs in the Channel Operations module.
Channel Operations Pt. 2 (06m:32s)
In this video Mike explains the RX 4 Advanced feature for Center Channel Extraction.
Spectrum Analyser (09m:47s)
In this video Mike explains and demonstrates the Spectrum Analyser module in action in their different modes.
Plug-In Hosting (09m:35s)
In this video Mike explains and demonstrates the Plug-in Hosting module in action by processing a file using Nectar inside iZotope RX.
Time and Pitch (13m:37s)
In this video Mike explains and demonstrates the RX 4 Advanced Time & Pitch module in action by pitch shifting a male voice and how to change the intonation and create vari-speed effects with the Time & Pitch module.
Resample - Advanced Only (05m:40s)
In this video Mike explains and demonstrates the Resample module in action by taking a 192 KHz sample rate file and down sampling it down to 44.1KHz and handling the aliasing.
Dither (07m:34s)
In this video Mike explains and demonstrates the Dither module in action, why Dither is important and how to reduce the bit depth of a file correctly.

www.groove3.com/str/iZotope-RX-4-Explained.html