Year/Release Date: 2015
Version: v4.0 SP1 build 2748
Developer: Geometric Global
Bit depth: 32bit, 64bit
Language: English
System requirements: Preset NX 6.0-10.0 Win 32/64bit


DFMPro (Design For Manufacturbility Professional) is a simple to use tool verify manufacturability of parts and assemblies for designers and engineers, integrated in Siemens NX. Its use facilitates the verification of the manufacturability and identifying parts of the project that can be time-consuming or expensive to manufacture in relation to turning, milling, turn-mill machining, sheet processing machine, etc.
Rapid analysis processability parts from the point of view of possibilities and principles of milling or turning is performed by module DFMPro. You simply choose the type of part - milling or turning - and in seconds receive a detailed report about possible problems processing. DFMPro will find everything available for the cutter elements not conforming to the company standards in terms of depth/diameter or by belonging to the standard range of diameters of the holes, fillets on the outer edges and a triangular inner corners, the openings facing the exterior faces are not perpendicular to or intersecting the internal cavity, and even higher precision tolerances. For lathe parts will also be found without curved grooves on the inner diameter and not all rounded circular edge. The numerical values of criteria of adaptability can be varied within wide limits in accordance with the requirements of the enterprise.
DFMPro is used in case of increased requirements to the capabilities of the system to verify manufacturability of parts and also for using such a tool for turning, milling and sheet detail. The module that performs more checks and checks not only the part geometry, but also for custom attributes, for example, a stamp material - but also allows you to customize the rules of analysis in a much broader range.

http://dfmpro.geometricglobal.com/
http://www.geometricglobal.com/

Download File Size:196.71 MB

---