2016
Pluralsight
03:40:37
English

In this course, you'll learn to have appreciation, understanding, and mastery of sketch constraints and part modeling in Inventor. You'll be presented with a 2D drawing and a challenge to model it in 3D. Software required: Autodesk Inventor 2016.

─ 01. Course Overview
│ └── 1. Course Overview.mp4
├── 02. Diving into 2D Sketches and Constraints
│ ├── 1. Sketching the Circles.mp4
│ ├── 2. Applying Constraints and Dimensions.mp4
│ └── 3. Extruding the Sketch.mp4
├── 03. Moving Further into Sketch Constraints - Concentric and Tangent
│ ├── 1. Sketching the Five Circles.mp4
│ ├── 2. Centering the Four Circles.mp4
│ ├── 3. Creating the Arcs.mp4
│ └── 4. Applying Constraints and Extrusion.mp4
├── 04. Creating Angular Dimension and Construction Lines
│ ├── 1. Establishing the Construction Geometry.mp4
│ ├── 2. Quick Construction of Base Profile.mp4
│ └── 3. Applying Constraints and Dimensions to Extrude the Profile.mp4
├── 05. Introduction to the Mirror and Point Tool
│ ├── 1. Sketching the Top Right Portion.mp4
│ ├── 2. Sketching the Bottom Half.mp4
│ └── 3. Completing and Extruding the Profile.mp4
├── 06. Creating Symmetrical 3D Parts with More Than Two Sketch Features
│ ├── 1. Creating the Base Sketch.mp4
│ ├── 1. Creating the Base Sketch.mp4.png
│ ├── 2. Applying Constraints and Dimensions.mp4
│ ├── 2. Applying Constraints and Dimensions.mp4.png
│ ├── 3. Editing an Existing Sketch.mp4
│ ├── 4. Applying Symmetry Constraint.mp4
│ ├── 5. Completing the Model.mp4
│ └── 5. Completing the Model.mp4.png
├── 07. Introduction to Parameters and Formulas in Dimensions
│ ├── 1. Creating the Base Sketch.mp4
│ ├── 1. Creating the Base Sketch.mp4.png
│ ├── 2. Applying Mirror to Base Details.mp4
│ ├── 3. Creating the Box Extrusion.mp4
│ ├── 4. Completing the Part.mp4
│ └── 5. Re-editing the Parameters.mp4
├── 08. Revolving a Sketch into 3D
│ ├── 1. Revolving the Sketch.mp4
│ ├── 2. Right Cut Extrusion and Adding a Hole.mp4
│ └── 3. Left Final Cut Extrusion.mp4
├── 09. Demonstrating the Sweep Command
│ ├── 1. Creating the Base Sketch.mp4
│ ├── 2. First Alternative.mp4
│ ├── 3. Second Alternative.mp4
│ ├── 4. Creating a Sweep.mp4
│ └── 5. Completing the Model.mp4
├── 10. Introducing Another Method and Use of Construction Planes
│ ├── 1. Creating the Inclined Block.mp4
│ ├── 2. Sketching the Points.mp4
│ ├── 3. Creating the Plane.mp4
│ └── 4. Extruding the Final Hole.mp4
├── 11. Creating an Angled Datum Plane
│ ├── 1. Creating the Cylinder and Right Tongue.mp4
│ ├── 2. Adding Details to the Right Tongue.mp4
│ ├── 3. Creating the Circular Hole Pattern.mp4
│ ├── 4. Sketching on the Angled Plane.mp4
│ └── 5. Extruding the Left Tongue.mp4
├── 12. Modeling a Popular Part in Drafting Classes
│ ├── 1. Creating the Base Feature.mp4
│ ├── 2. Extruding the Bottom Cut.mp4
│ ├── 3. Detailing the Right Portion.mp4
│ ├── 4. Removing the Back Material.mp4
│ ├── 5. Removing the Front Material.mp4
│ └── 6. Creating the Final Detail.mp4
├── 13. Anticipating Revisions in Our Model
│ ├── 1. Creating the Rectangular Base.mp4
│ ├── 2. Plane at an Angle.mp4
│ ├── 3. Cut Extrusions on the Left Side.mp4
│ ├── 4. Extruding the Tombstone.mp4
│ ├── 5. Referencing Features to a Plane.mp4
│ └── 6. Demonstration of Parent Child Relationship.mp4
├── 14. Reinforcing Various Constraints and Applying Construction Planes
│ ├── 1. Extruding the Base Feature.mp4
│ ├── 2. Bottom Rectangular Extrusion.mp4
│ ├── 3. Creating the Rounded Cut.mp4
│ ├── 4. Extruding the Right Tombstone.mp4
│ ├── 5. Detailing the Right Tombstone.mp4
│ └── 6. Creating the Left Tombstone.mp4

Download File Size:918.41 MB

---