× Siemens NX 1957 Build 1901 (NX 1953 Series) Close
Siemens NX 1957 Build 1901 (NX 1953 Series) | 14.9 Gb
Languages: English, 中文, Čeština, Español, Français, Deutsch, Italiano,
日本語, 한국어, Polski, Português, Русский
The Siemens Digital Industries Software development team is pleased to announce the availability of NX 1957 Build 1901 (NX 1953 Series), the latest release of NX, which brings significant significant new and enhanced functionality in all areas of the product, as well as several new design tools, to help you work more productively and efficiently to build your 3D digital twin.
NX December release details - Date: January 2021
1957 ENHANCEMENTS
Lattice Functional Improvements: Organic Blending
Use the Organic Blend option to create a blended lattice with a specified blend factor.
× Siemens NX 1957 Build 1901 (NX 1953 Series) Close
The pore size of Voronoi lattices adjust the lattice graph based on the specified rod diameter. Organic blending is likely to reduce the pore size especially for large blending factors. This effect will not be considered for calculating the lattice graph. That means that for organic blending the effective pore size may be smaller than specified.
You can use organic blending in the following lattice commands:
× Siemens NX 1957 Build 1901 (NX 1953 Series) Close
Fixed_Problem_Reports_1957 1957,1997591,Import of Creo 2.0 PTC piece part fails,TRANSLATOR,PROE_INTERFACE,ALL
1957,7252445,Cannot translate new PROE files,TRANSLATOR,PROE_INTERFACE,ALL
1957,7714122,IPW on turning operation is broken,CAM,TURNING,GEOMETRY
1957,8456106,Unable To Select Convergent Body For Process Simulation,CAE,ADV_SIMULATION,ADDITIVE_MAN
1957,8457248,Default Value for attributes in GARoomDefinition.xml not working,SHIP_DESIGN,GENERAL_ARRANGE,ROOM_ATTR
1957,8457647,Simplify Path with tolerance exceeded is refused (OK) without alert (WRONG),RSD_GENERAL,PATH,EDIT
1957,8457674,Simplify Path to be refused if fixed angle corners are used on end(s) of segment,RSD_GENERAL,PATH,SIMPLIFY
1957,8458135,Problem with update/status of composite curve,DESIGN,DESIGN_GROUPS,UNDETERMINED
1957,8459766,Internal error when doing Robotics simulation with collision checking,CAM,ISV,ROBOTICS
1957,8459853,Number of templates in the В‰\DESIGN_TOOLS\checkmate\customization\simpl_chinese,KDA,VALIDATION,HD3D_RESULTS
1957,8459918,Missing Tag for P&ID,NXMANAGER,DEAP,ALL
1957,8460891,An error occurs when executing the model setup command on SOL153,CAE,ADV_SIMULATION,CHK_MODEL_SETUP
1957,8461341,the new create feature process function doesn't find tools of non-leaf classes,CAM,FEATURE_BASED,OPERATION_SELEC
1957,8462212,incorrect export of RSPLINE element in Simcenter 3D,CAE,ADV_SIMULATION,NASTRN_NX_EXPRT
1957,8462956,Manufacturing Preparation missing Feature Name,SHIP_DESIGN,MANUFACTURING,MFG_PREP
1957,8463175,Plate Chamfer does not work,SHIP_DESIGN,STEEL_FEATURES,PLATE_CHAMFER
1957,8463769,EndCut_Parameter_Rules does not work as in NX12,SHIP_DESIGN,STEEL_FEATURES,END_CUT
1957,8464145,Endcut with Preview forces an internal error message,SHIP_DESIGN,STEEL_FEATURES,PROFILE_CUTOUT
1957,8464206,Create Linear Path with Dynamic Axis and Slope value gives uncontrolled XC-YC Pt,SYSENG,UI_COMPONENTS,OTHER_BLOCK
1957,9256485,NX is not able to import ProE file,TRANSLATOR,PROE_INTERFACE,ALL
1957,9549944,Enhancement Request: unique part IDs for all plates and profiles,SHIP_DESIGN,STEEL_FEATURES,PLATE
1957,9777084,Customization of the XML intermediate file to export the symbol attributes,P&ID_DESIGNER,2D_TO_3D,EXPORT_RUN
1957,9789471,Unable to generate tool path in turning operation - Offset Blank Geometry Failed,CAM,TURNING,GEOMETRY
1957,9812396,Interoperability with SE 2020 doesn't work anymore for Hole Milling,ASSEMBLIES,PART_FILE_OPS,OPEN_SOLID_EDGE
1957,9833030,ERROR 1250 run_ugtopv.bat on a list of parts causes remainder of list,TRANSLATOR,NX_JT,TC_INTEGRATION
1957,9848646,SheetMetal.ExportFlatPatternBuilder Journal fails to create DXF file in batch,NX_SHEET_METAL,FLAT_PAT_EXPORT,DXF
1957,9856305,Pro-E files are not translating,TRANSLATOR,PROE_INTERFACE,ALL
1957,9859732,NXPROE Translator issues,TRANSLATOR,PROE_INTERFACE,ALL
1957,9861598,4GD load workset fail due to Encountered unexpected NULL pointer,ASSEMBLIES,ASSEMBLY_MODEL,COMP_REPLACE
1957,9866080,Append .cdb does not read Physical Property label properly,CAE,ADV_SIMULATION,ANSYS_IMPORT
1957,9877724,Incorrect behavior during unit and trigonometric calculation,DESIGN,EXPRESSION,ALL
1957,9881483,Material attribute on overstock is changed or removed with associatived part,ROUTING_GENERAL,STOCK_AS_COMP,OVERSTOCK
1957,9882671,"Using ""LIST"" option on_ugtopv.bat, will not continue if failure occurred",TRANSLATOR,NX_JT,TC_INTEGRATION
1957,9884953,Error during Robotics simulation when collision checking is on,CAM,ISV,ROBOTICS
1957,9890359,Calling NXOpen::MeasureBodies methods fail from Part Opened Callback,DESIGN,INFO_ANALYSIS,MEASURE
1957,9892485,Offset blank geometry failed,CAM,TURNING,GEOMETRY
1957,9893683,"""Part is not a version of component part"" alert appears for each com",GATEWAY,OPEN_JT,LOAD_FRAMEWORK
1957,9901660,Material data is not displayed properly,CAE,ADV_SIMULATION,MATERIALS
1957,9902594,Add-on rule is created in Japanese name automatically and returns a syntax error,CAM,FEATURE_BASED,FEATURE_TEACH
1957,9904400,Changed behavior for NXOpen.PrintPDFBuilder,NXMANAGER,TRANSLATORS,INFRASTRUCTURE
1957,9904988,Replacement Assistent does not work in NX1926,DESIGN,WAVE,LINKED_BODIES
1957,9905619,Profile Sketch: wrong values for shear angle/distance on edge reinforcement plat,SHIP_DESIGN,DRAWING_AUTO,INVRS_BEND_LINE
1957,9905841,Outer path cannot be generated with circumference with 5 axis Scan,CMM_INSPECTION,PATH,ALL
1957,9906244,Tool Path Animation causing fatal error in managed mode,CAM,TC_MFG,OTHER
1957,9906804,"The message ""PAMEAS/ Scanning is not supported."" is displayed",CMM_INSPECTION,POSTPROCESSING,MCOSMOS
1957,9906988,Offset blank geometry failed,CAM,TURNING,GEOMETRY
1957,9908013,Bolt Mesh from Universal Connection incorrectly generated,CAE,ADV_SIMULATION,CONNECTIONS_UNI
1957,9912515,"computation is successful in 2020.1, fatal error - in 2020.2",CAE,ADV_SIMULATION,SYSNOISE_SOLVER
1957,9913891,IDs are different after importing CDB,CAE,ADV_SIMULATION,ANSYS_IMPORT
1957,9913892,"Under 3D collector, name of the collector imported is showing as ""shell""",CAE,ADV_SIMULATION,ANSYS_IMPORT
1957,9913895,Label not consistent for Real Zeroes,CAE,ADV_SIMULATION,ANSYS_IMPORT
1957,9916426,Tooling BOM - Sort Ascending disregards alphanumeric order since NX1899,KDA,MOLDWIZARD,BOM
1957,9916450,Welding Joint Maximum Face Gap,KDA,WELD_ASSISTANT,WELDING_JOINT
1957,9917348,Dimension values are changed performing Export 2D Exchange (Output to Drafting),TRANSLATOR,UGTO2D,EXPORT_DRAFTING
1957,9918557,NX hangs up while typing one of similar names into feature expression block,DESIGN,EXPRESSION,USER_INTERFACE
1957,9919008,Broaden the display values for Customer Defaults Sheet Metal Material Standards,NX_SHEET_METAL,DEFAULTS,ALL
1957,9919039,Poor save performance (with mass calc on),DESIGN,INFO_ANALYSIS,MASS_PROPERTIES
1957,9919683,Graphics performance of dynamic preview during Extrude command extremely in 1926,DESIGN,FEATURE_MODEL,EXTRUDE_GENERAL
1957,9919715,"SpecDur - Only positive stress values allowed for ""Surface Residual Stress""",CAE,ADV_SIMULATION,DUR_SPEC_SOLV
1957,9919746,SpecDur - Surface Residual Stress causes error message in calculation,CAE,ADV_SIMULATION,DUR_SPEC_SOLV
1957,9920277,MLPP cannot deal with large CGNS files,CAE,ADV_SIMULATION,NVA_NVH_SOLV
1957,9920402,"NX P&ID Mechanical Routing, Run and Run Item Attribute Prefix String (CD) fail",NXMANAGER,DEAP,ALL
1957,9920408,"Ship design with NX1926, ability to change the profile cutout and bracket colour",SHIP_DESIGN,MODELING,ALL
1957,9920701,Measure Minimum Perpendicular distance not correct in NX1926,DESIGN,EXPRESSION,MEASUREMENTS
1957,9922009,Progressive Die Wizard intermediate stages does not work with Teamcenter with th,KDA,PROGRESSIVE_DIE,ALL
1957,9922962,mqc_askObjectOfType hangs on data,ASSEMBLIES,POSITIONING,CONSTRAINTS
1957,9923311,Electrical Routing PLMXML gives internal error when imported into NX,ROUTING_ELEC,CONNECTION_LIST,IMPORT_ALL
1957,9923374,P&ID EQUIPMENT TYPE and RELATIONSHIP not working,NXMANAGER,DEAP,ALL
1957,9924787,Ship Structure XML Export to custom item type,SHIP_DESIGN,BASIC_DESIGN,STRUCTURE_XML
1957,9924850,Flex animation scale,CAE,MOTION,ANIMATION
1957,9925673,P&ID Library Install tool does not complete the installation,PLMXML,IMPORT_EXPORT,ALL
1957,9926365,Check-Mate: The HTML template file for detail is not found,KDA,VALIDATION,HD3D_RESULTS
1957,9926543,Import ansys files,CAE,ADV_SIMULATION,ANSYS_IMPORT
1957,9931774,Fail to create select recipes for Bearing based on mres file in Simcenter Acoust,CAE,MOTION,MOTION2ACOUSTIC
1957,9931998,Allow HVAC as a supported discipline (routing) for NX P&ID,P&ID_DESIGNER,MISCELLANEOUS,ALL
1957,9933115,Cut region not detected,CAM,TURNING,GEOMETRY
1957,9933832,"EndCut need to have a Shear Angle"" input",SHIP_DESIGN,STEEL_FEATURES,END_CUT
1957,9934518,Selection recipe -name of the CMBLOCK written with FEM name in the ANSYS deck fo,CAE,ADV_SIMULATION,ANSYS_EXPORT
1957,9939373,Incorrect Module Number A FATAL ERROR OCCURRED. PROGRAM STOPPED,CAE,ADV_SIMULATION,SYSNOISE_SOLVER
1957,9944738,Law defined spline created in NX11 is not updating properly in NX1872,DESIGN,CURVE,LAW_SPLINE
1957,9945708,Place component command does not work when part_name equals Item ID,ROUTING_ELEC,COMPONENT_LIST,CREATE_COMP
× Siemens NX 1957 Build 1901 (NX 1953 Series) Close
Siemens NXSeries software is a flexible and powerful integrated solution that helps you deliver better products faster and more efficiently. NXSeries delivers the next generation of design, simulation, and manufacturing solutions that enable companies to realize the value of the digital twin.
Supporting every aspect of product development, from concept design through engineering and manufacturing, NXSeries gives you an integrated toolset that coordinates disciplines, preserves data integrity and design intent, and streamlines the entire process.
Siemens become the first major CAD/CAM/CAE vendor to deliver its software using Continuous Release methodology in January 2019. The new Continuous Release process significantly reduce the time between the proposal of a new enhancement, and its deployment to the end users. Customers will now have the opportunity to deploy the latest NXSeries productivity enhancements more quickly in their production environment which helps them become more productive when using NXSeries. In addition the Continuous Release will also reduce deployment costs for incremental updates.
Adopting a continuous release strategy also allows both Siemens and our customers to be more responsive to new ideas and trends in technology, once again allowing our customers to stay ahead of their competition.
NX1953: NX TDP Automatic BOM Table enhancements
Siemens Digital Industries is an innovation and technology leader in industrial automation and digitalization. In close cooperation with our partners and customers, we are the driving force for the digital transformation in the discrete and process industries.
Product: Siemens NXSeries
Version: 1957 Build 1901 (NX 1953 Series)
Supported Architectures: x64
Website Home Page : www.plm.automation.siemens.com
Language: multilanguage
System Requirements: PC *
Size: 14.9 Gb
Files save in the NX-1953 Series (NX-1953 and higher) cannot be opened in the NX-1026 Series and lower versions of the NX
* System Requirements: Minimum Operating Systems
- Microsoft Windows 10 (64-bit) Pro and Enterprise editions
Windows 10
Windows 10 is the minimum supported release for NX 1926. The supported versions of Windows 10 are the Pro and Enterprise editions utilizing Semi-Annual Channel (SAC) updates.
Windows 7 and 8.1
Windows 7 has reached the end of life and mainstream support has ended. Windows 8.1 is still supported by Microsoft, but was rarely deployed. These two versions of Windows are no longer supported by NX 1926. Siemens Digital Industries Software has not performed testing on these version and cannot resolve any issues related to NX 1926 running on these operating systems. If NX 1926 is deployed on these versions of Windows, any issues will have to be replicated on Windows 10 before filing an incident report with GTAC.
Windows XP and Vista
Windows XP support from Microsoft has ended and Vista was rarely deployed so these two versions of Windows are not supported by NX 1926. Siemens PLM Software has not performed testing on these versions and cannot resolve any issues related to NX 1926 running on these operating systems. If NX 1926 is deployed on these versions of Windows, any issues will have to be replicated on Windows 10 before filing an incident report with GTAC
Recommended System Configuration:
- 64-bit Windows 10 operating system
- 4 GB RAM minimum, 8 GB or 16 GB RAM recommended
- True Color (32-bit) or 16 million colors (24-bit)
- Screen Resolution: 1280 x 1024 or higher, widescreen format
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
× Siemens NX 1957 Build 1901 (NX 1953 Series) Close
Download File Size:13.41 GB
|
