× Comsol Multiphysics 5.6 Update 1 Close
Comsol Multiphysics 5.6 Update 1 | 5.4 Gb
Languages: Simplified 中文, Traditional 中文, English, Français,
Deutsch, Italiano, 日本語, 한국어, Español.
COMSOL has released version 5.6 Update 1 of its COMSOL Multiphysics software. The new version contains performance and stability improvements to COMSOL Multiphysics, COMSOL Server, and COMSOL Client.

COMSOL SoftwareE 5.6 Update 1 - Released February 8, 2021
All COMSOL software products undergo stability improvements that are introduced as updates. The following list contains the most important improvements in COMSOL version 5.6 update 1.

Update Details COMSOL Multiphysics
- Added new launch flag disablehwacceleration to disable hardware acceleration for the entire user interface. This flag can be used to work around graphics driver issues with the new Intel® Iris Xe graphics chip.
- Fixed GTK-related errors and warnings appearing when launching COMSOL Multiphysics from the command line on Linux.
- Fixed compact history for nested node groups.
- The Image to Curve add-in has been updated to better support the Update functionality in the Model Builder. In addition, the toolbar functionality has been improved and the curve generation is no longer immediately triggered when settings are changed.
- Performance and stability improvements.

COMSOL Compiler
- Performance and stability improvements related to the general COMSOL Multiphysics updates.

COMSOL Server
- Performance and stability improvements related to the general COMSOL Multiphysics updates.

Application Builder
- Reloading add-ins now correctly takes method definition changes into account, for example, when changing between Method and Method Call.
- Exporting animations to file from an app now supports Current size, which makes the animation use the size of a corresponding graphics form object showing the relevant plot group.

AC/DC Module
- Improved stability of time-dependent studies with Ampère's Law, Magnetostrictive, and Lorentz Coupling features.

Acoustics Module
- The computation of intersections with the Receiver dataset used in the Impulse Response plot has been improved for meshed domains.
- The computation performed in the Impulse Response plot has been corrected to ensure consistent levels by using power summation at the receiver. Aliasing issues have also been fixed by filtering in continuous time.
- The computation of the clarity and definition objective metrics, used for room acoustics, has been fixed when evaluated by the Energy Decay subfeature in the Impulse Response plot.
- Stability improvements when solving dG-time-explicit-based physics together with systems of ODEs.
- Stability improvements.

CAD Import Module, Design Module and LiveLink Modules for CAD
The CAD file import functionality has been extended to support new versions for the following file formats:
- ACIS (.sat, .sab, .asat, .asab): 2021 1.0.
- AutoCAD (.dxf, .dwg): 2021.
- Inventor (.iam, .ipt): 2021.
- NX (.prt): 1926.
- SOLIDWORKS (.sldprt, .sldasm): 2021.

CFD Module
- Turbulent flow has been activated for inelastic non-Newtonian fluids. Note that the Viscosity field will be reset to From material for models including turbulence in non-Newtonian fluids in versions prior to 5.6 u1.

Chemical Reaction Engineering Module
- The derivative of the pressure with respect to the pellet radius has been renamed to avoid duplicate variable names.
- The update of diffusivities, defined by the Chemistry interface when a reaction node or a species node is disabled, has been corrected.

Heat Transfer Module
- In the Porous Medium heat transfer feature, the Porous Medium section has been removed from the user interface unless a module providing options to define the Effective conductivity model is available.
- For nonisothermal flow, the heat capacity evaluation has been corrected when the Boussinesq approximation is combined with the Phase Change Material feature in the heat transfer interface.
- Added coupling between heat transfer in the Porous Medium and Nonisothermal Flow nodes to support porous materials.
- For Heat Transfer in Fluids, the Ideal gas and From material options are now included with a basic COMSOL Multiphysics® license.
- The definition of postprocessing variables for energy balance has been optimized in order to reduce memory use and model loading time.
- The definition of the surface temperature in the Heat Flux, Temperature, and Surface-to-Ambient features in the Heat Transfer in Shells interface has been fixed.

MEMS Module
- The Compliance matrix and Elasticity matrix of the piezoelectric material polyvinylidene fluoride (PVDF) have been corrected to be consistent with the Voigt notation.

Particle Tracing Module
- Fixed incorrect behavior when opening and rerunning models created in older versions that used the Space Charge Limited Emission multiphysics coupling node.
- Fixed an error when computing the space-charge-limited current of emitted electrons from a cathode at nonzero electric potential.
- Fixed an incorrect expression in the reported values of the Twiss parameters for asymmetric charged particle beams in 3D.
- The Symmetry boundary condition no longer gives an error message when its selection is empty.
- In the Particle Tracing for Fluid Flow interface, a possible circular variable dependency error has been eliminated. It could occur when the particle mass and diameter were specified for some species, while the particle density and diameter were specified for other species.

Ray Optics Module
- Fixed an error in the calculation of phase delays for the Interference Pattern plot.
- The inputs for reflectance and transmittance now appear in the settings for the Scattering Boundary node when computing ray power.
- The software now avoids the creation of Particle and Ray datasets corresponding to disabled physics interfaces, which could sometimes cause an unexpected error to occur.
- Rays undergoing total internal reflection no longer contribute a large negative imaginary number to the deposited ray power on material discontinuities.

Semiconductor Module
- The selection of the Schrödinger-Poisson multiphysics coupling is extended to include domains of the Second-Order Hamiltonian domain condition.

Structural Mechanics Module
- The formulation for wear using deformed geometry has been improved to avoid spurious wear rate after separation of wear surfaces.
- Fixed a problem with the random-vibration operators, whereby they could incorrectly return zero when evaluated during assembling.
- Stability improvements.

Subsurface Flow Module
- Out-of-plane thickness in the Well feature with a mass flow rate is now considered.
× Comsol Multiphysics 5.6 Update 1 Close
COMSOL Multiphysics is a general-purpose simulation software for modeling designs, devices, and processes in all fields of engineering, manufacturing, and scientific research. In addition to using multiphysics modeling for your own projects, you can also turn your models into simulation applications and digital twins for use by other design teams, manufacturing departments, test labs, customers, and more.

The platform product can be used on its own or expanded with functionality from any combination of add-on modules for simulating electromagnetics, structural mechanics, acoustics, fluid flow, heat transfer, and chemical engineering. The add-on modules and LiveLink products connect seamlessly for a modeling workflow that remains the same regardless of what you are modeling.


COMSOL Inc. is a global provider of simulation software for product design and research to technical enterprises, research labs, and universities. Its COMSOL Multiphysics product is an integrated software environment for creating physics-based models and simulation applications. A particular strength is its ability to account for coupled or multiphysics phenomena. Add-on products expand the simulation platform for electromagnetics, structural, acoustics, fluid flow, heat transfer, and chemical applications. Interfacing tools enable the integration of COMSOL Multiphysics simulations with all major technical computing and CAD tools on the CAE market. Simulation experts rely on COMSOL Server to deploy applications to their design teams, manufacturing departments, test laboratories, and customers throughout the world. Founded in 1986, COMSOL has 19 offices worldwide and extends its reach with a network of distributors.

Product: Comsol Multiphysics
Version: 5.6 Update 1 (Build 341)
Supported Architectures: x64
Website Home Page : www.comsol.com
Language: multilanguage
System Requirements: PC / macOs / Linux *
Size: 5.4 Gb

* System Requirements: These requirements are common to all platforms:

- A working network card and internet connection are recommended during installation
- At least 4 GB of RAM is recommended
- 2–13 GB of disk space, depending on your licensed products and installation options
- Adobe Acrobat Reader to view and print the COMSOL documentation in PDF format
- An Intel or AMD 64-bit processor based on the Intel 64 or AMD64 architecture with the SSE4 instruction set. Intel processors released 2009 or later and AMD processors released 2012 or later satisfy this requirement.

Operating System Requirements

Windows 10
Windows 10 Pro for Workstations
Windows 8.1
Windows 7 SP1
Windows Server 2019
Windows Server 2016
Windows Server 2012 R2
Windows Server 2012
Windows Server 2008 R2 SP1
Windows HPC Server 2008 R2 SP1

macOS 10.13, 10.14, 10.15 and 11.0

Debian 9 and 10
Red Hat Enterprise Linux 7.8 and 8.2
CentOS 7.8 and 8.2
Ubuntu 16.04, 18.04 and 20.04
SUSE Linux Enterprise Desktop 15 SP2
OpenSUSE Leap 15.1 and 15.2
Please visit my blog

Added by 3% of the overall size of the archive of information for the restoration

No mirrors please

× Comsol Multiphysics 5.6 Update 1 Close

Download File Size:5.16 GB

---