× Siemens Simcenter MAGNET Suite 2021.1 Close
Siemens Simcenter MAGNET Suite 2021.1 | 1.2 Gb
The software developer Simcenter Team is pleased to announce the availability of MAGNET Suite 2021.1. With this release, we deliver new capabilities and performance enhancements to help you model the complexity of your electromechanical devices and explore the possibilities with advanced optimization.
× Siemens Simcenter MAGNET Suite 2021.1 Close
What’s New in Simcenter MAGNET 2021.1
Here are some highlights of what the new release offers.
More Magnetostriction Capabilities For Tougher Problems
Firstly, let’s explore the increased model accuracy for grain-oriented electrical steel (sometimes called silicon steel) which enhances the magnetostrictive force calculations added in Simcenter MAGNET 2020.2.
Many transformer cores use grain-oriented electrical steel. Likewise, it can also be used in other stationary equipment in which the magnetization direction is unidirectional. Obtaining a thorough set of measured material property data can be challenging. That is because the measurements are complex and require sophisticated equipment. The material characterization is a crucial component for accurate simulation of magnetostrictive forces in such types of steels.
Therefore, to address this issue, Simcenter MAGNET 2021.1 converts more easily and accurately available uniaxial measured data into anisotropic property data for grain oriented electrical steels. This results in more accurate predictions of the magnetostrictive forces.
× Siemens Simcenter MAGNET Suite 2021.1 Close
× Siemens Simcenter MAGNET Suite 2021.1 Close
You can read the Magnetostriction, a Source of Noise in Transformer blog for more details on how these new capabilities predict the vibration flashpoints in a laminated grained-oriented steel core.
× Siemens Simcenter MAGNET Suite 2021.1 Close
Coil Whine? Check Your Lorentz forces
New in Simcenter MAGNET 2021.1 is a Lorentz forces export for structural analysis. In transformers, these forces are acting on the windings. The forces produce an electromagnetically excited acoustic noise more commonly referred to as coil whine.
Shown below is a 3-phase transformer with 3 sets of windings wound around 3 limbs. Due to the stray field from the transformer core, the windings experience a force which is proportional to the magnitude of the magnetic field and the currents flowing in the windings. This force can cause vibration. Under severe conditions such as short circuit currents, it can lead to a total failure and pose a safety hazard. Therefore, a structural analysis which includes Lorentz forces is necessary to avoid such issues.
× Siemens Simcenter MAGNET Suite 2021.1 Close
Direct Interface with HEEDS: Design Space Exploration for Electromagnetics
Simcenter MAGNET is available as a direct portal in the HEEDS Workflow Manager without the need for custom scripting. As a result, Simcenter MAGNET’s electromagnetic simulations data is automatically shared between different modeling and simulation products.
× Siemens Simcenter MAGNET Suite 2021.1 Close
× Siemens Simcenter MAGNET Suite 2021.1 Close
× Siemens Simcenter MAGNET Suite 2021.1 Close
Simcenter MAGNET 2D/3D is a powerful simulation software for performance prediction of motors, generators, sensors, transformers, actuators, solenoids, or any component with permanent magnets or coils. With our efficient-to-use and accurate software, you can optimize, design, and analyze simple to complex electromagnetic and electromechanical devices.
Simcenter MAGNET virtual prototyping is both cost and time efficient. Parametric and optimization studies allow the exploration of multiple configurations, for performance improvements. The accurate replication of the operating and extreme conditions provides insight into the loss and temperature hotspots, permanent magnet demagnetization, unused material, and failure analysis through fault conditions.
Professor Pragasen Pillay from Concordia University explains how they use Simcenter MAGNET & Motorsolve for electrical machine design particularly for renewable energy and electric vehicles applications.
At the 2019 Siemens Media & Analyst Conference in New York, Siemens PLM Software announced that it is changing its name to Siemens Digital Industries Software. The company explains that the change reflects not only its position inside the core operating company, Siemens Digital Industries, but also its evolution from product lifecycle management (PLM) software to a broad provider of industrial software and services for digitalization.
Product: Siemens Simcenter MAGNET
Version: Suite 2021.1 *
Supported Architectures: x64
Website Home Page : www.plm.automation.siemens.com
Language: english
System Requirements: PC **
Size: 1.2 Gb
* release info: - Simcenter MAGNET 2021.1
- Simcenter MAGNET Batch Submit Utility 2021.1
- Simcenter MAGNET CADTranslator 2021.1
- Simcenter MAGNET Design Optimization 2021.1
- Simcenter MAGNET Electric 2021.1
- Simcenter MAGNET Simulink Plugin 2021.1
- Simcenter MAGNET SMG Simulink Plugins 2021.1
- Simcenter MAGNET System Model Generator 2021.1
- Simcenter MAGNET Thermal 2021.1
- Simcenter MAGNET Trajectory Evaluator 2021.1
** System Requirements: System requirements:
- Windows 10 x64 version 1909
Operating systems should include the latest Microsoft published updates.
- Microsoft .NET Framework 4.0 or higher is required. Simcenter MAGNET requires Microsoft .NET Framework 4.6 or higher if distributed solver jobs are submitted to multiple processors and clusters.
The recommended minimum hardware requirements are:
- Processor: Intel Core i5 or AMD FX
- 2GB RAM
- 40 GB of free disk space
- Minimum screen resolution of 1280 x 1024 with normal font size selected and scaling set to 100%
- Graphics card: OpenGL compatible video card
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
× Siemens Simcenter MAGNET Suite 2021.1 Close
Download File Size:1.18 GB
|
