Recognized by the professionals and adopted by the most demanding engineers,
Effel is the first French program that proposes a complete environment for
the structures calculation, dedicated to the construction profession.
- Create linear elements with the CAD
(bars, beams, beams with variable inertia), circle arcs, of planar elements
(membranes, plates, shells...), place openings,
- Use the automatic help for type generation "ÑFrameÑ", "ÑArcheÑ", for the
current structures etc. or for your own models.
- Apply any loads (prompt, linear and planar), or use automatic help
generation for the clean weight, the climatic loads, the seismic actions,
the earth or water pressure,
- Anchor your structures on the prompt, linear supports or rigid, elastic and
stubborn type surfaces.
Effel is ready to mesh the structures (controlled mesh, Delaunay, imposing,
sophisticated) and leads calculations to finish in static, dynamic
(clean modes, earthquake, vibrations, shocks.) elements, generalized buckling
and non linear (tie and earth). But beyond this basic functionality Effel is
also capable to disclose anomalies of description, and to propose some
technical solutions.
From structure calculation Effel verifies and optimize the work in accordance
with the job regulations:
- Reinforced concrete
- Metallic construction
- Wood construction
Arche
Since its commercial exit in 1993, Arche imposed itself as the reference
software for the conception and the drawing of buildings in reinforced
concrete. From a 3D model of a building composed of slabs, beams, columns,
walls and foundations, Arche analyzes the global stability and products
automatically all the reinforcement of the work.
Arche Structure is a simulation building software that permits to do
quickly and in all rigors, your studies of load distribution, wind
bracing and earthquake, while respecting the profession usual methods.
Arche Structure distinguishes itself by its technical innovations:
- Built-in 3D CAD, or modeling in Allplan Engineering.
- EC2 norms, BAEL, ACI, DIN,
- Preliminary sizing
- Calculations of loads distribution and wind bracing with models mixing
traditional methods and numeric sophisticated modeling
- 3D Climatic generator (EC1, NV65-84)
- Seismic analysis in dynamics mode
- Automatic production of calculation reports, measured and approximate
- Connection direct Advance, Arche Vision, Allplan Engineering etÑEffel
Arche also places at your disposal the geometric calculation tools
sections modes, theoretical calculation EC2 / BAEL and of production of
steel slips.
It even integrates a returned realist module. Arche reinforcement modules
are software's dedicated to the conception, the analysis and the automatic
production of reinforcement plans in reinforced concrete. Indicate geometry,
loads and the general hypotheses, and you will get from a simple click:
curves of solicitations, constraints in the concrete and steel, arrows, and
of course. execution plans of reinforcement! With Arche Reinforcement you
have upscale software that optimizes the conception of the reinforcement
while getting the best profit using the profession.
- EC2 norms, BAEL, ACI, DIN, DTU Fire,
- Constructive arrangements in accordance with the seismic rules
(PS92, RPA88, SI413, P100-92)
- Interactive reinforcement modification with user alert in the case of forced
regulations
- Built-in DAO for the plans retouching
Download File Size:680.62 MB
|
